Corporate Headquarters:
Los Angeles, California
(800) 511. 2747
|
FENCE DETAIL AND SPECIFICATIONS
Following are basic specifications on our concrete fence products.
If you are a professional specifier, we will upon you r request, provide
you engineering specifications and calculations in a format you can download
and place on your plans.
If you would like to download CAD details, simply register with us to receive access. Click here.
General
- Available from 1' - 12' high wall heights.
- Concrete p anels and concrete posts have same
texture on both sides.
- Panels, Posts and Panel Caps shall be normal
weight concrete having sand and gravel or manufactured
with coarse and fine crushed stone aggregates
mixed with ASTM-C150, Type I or Type III Portland
Cement and shall have a minimum compression strength
of 5,000 psi @ 28 days.
- Includes optional textured inline, corner
and end post caps with Fencestone ® and Brickcrete ® concrete
wall designs.
- Integral iron oxide color s and high strength
concrete to be thoroughly mixed and vibrated.
- Steel reinforced panels and rebar reinforced
posts and rails. Rebar conforms to ASTM A615,
grade 60.
- Polypropylene Fiber to be used in all components
as a secondary reinforcement.
- Concrete Wall posts set five feet apart for Woodcrete ®, Fencestone ® and Brickcrete ® -
six foot on center for Cedarcrete ® and
eight foot on center for Woodcrete ® Ranch
Rail fence.
- Post footings: as above at various depths
based on field conditions.
- Loading: Wind loading and surcharge loads
will be applied to the panels, columns, and foundation
components per local building code requirements.
Precast Concrete Fence Components Dimensions
- Posts shall have a typical cross sectional dimension of 5" as measured from face-to-face.
- Posts to 8’ long shall be reinforced with 1 #4 rebar, each face. 9’ and 10’ posts to have 2 #4 rebar each face.
- Method of post attachment to concrete footing/pier shall be by embedment in poured concrete. Depth of concrete pier, and embedment of post shall be as shown on Shop Drawing from manufacturer.
- Panels shall have typical dimensions of 56 1/2" long by 12" high by 2" wide at its maximum dimension and no less than 1 3/4" wide at its minimum dimension.
- Panels shall have an interlock construction.
- Panel caps shall have typical dimensions of 56 1/2 " long by 2" high by 4" wide.
- Panel caps shall be reinforced with 1 - #4 rebar positioned in mold with rebar clip.
Colors
- Integrally colored iron oxide pigments , in
either liquid or dry format.
- As
selected from manufacturer’s range
of standard colors.
Post Footing Design
- Diameter:
12" minimum and per design
calculations.
- Depth:
30" minimum and per design calculations.
- Reinforcement: None, unless required per design
calculations for high wind loads.
- Where a Designer Concrete fence post shares
the same pier with a steel gatepost, size of
pier shall be increased to accommodate both posts.
Concrete for this pier shall have a minimum compressive
strength of 3,000 psi @ 28 days.
- Concrete for line post piers shall be normal
weight concrete having sand and gravel or crushed
stone aggregates mixed with ASTM-C150, Type I
or Type III Portland Cement and shall have a
minimum compression strength of 2,500 psi @ 28
days.
|
